KERA®starPEEK
Chemical composition*
| Polyetheretherketon (PEEK) | TiO² | Pigment (Ti, Ni, Sb)O² |
| ~ 80% | ~20% | KERA®starPEEK TC < 1 % KERA®starPEEK SW 0 % |
*Lot numbers may show minimum deviation from typical values.
More information are available on our instruction for use.
The metal free alternative
KERA® starPEEK – Milling disc
Indications
- Crowns and Bridges for veneering with composite
- Removable restorations on copings
- 2 piece abutments
- Gingivaformer
- Implant based screwed bridges
- Splints
Typical values
| flexural strength (MPa) | 178 |
| strain at yield (%) | 4,2 |
| elongation (%) | 10 |
| young's modul (MPa) | 5100 |
| density (g/cm³) | 1,5 |
| notched impact strength (KJ/m²) | 5,1 |
| melting range (°C) | 340 |
| water absorbtion (%) | 0,4 |
| colours | SW white TC tooth colour |
| dimension, diameter and length (mm) (X) = 12/16/20/25 | Ø 98,3 x (X) Ø 99,5 x (X) |
Chemical composition*
| Polyetheretherketon (PEEK) | TiO² | Pigment (Ti, Ni, Sb)O² |
| ~ 80% | ~20% | KERA®starPEEK TC < 1 % KERA®starPEEK SW 0 % |
*Lot numbers may show minimum deviation from typical values.
More information are available on our instruction for use.